Austin Exploration Eagle Ford Well with Halcón Resources Has Good Initial Production (IP) Rates

Austin Exploration Eagle Ford Acreage Map
Austin Exploration Eagle Ford Acreage Map

Australian-based Austin Exploration saw good initial production (IP) rates from its' first Eagle Ford well with farmee partner

Halcón Resources in late March 2014 of 1,066 boe/d (87% oil). The well (Stifflemire #1H) was drilled to a total depth of 17,000 feet with an 8000 foot horizontal leg into the Eagle Ford Shale.

Austin Exploration entered the Eagle Ford in 2011, and in May 2013 announced a farm-out program with Halcón, whereby Halcón agreed to pay for the cost of three horizontal wells to earn a 70% interest in 4,400 acres of Austin's Birch Project. The cost to drill these wells is approximately $10 million per well.

The oil flow from our first Eagle Ford well with Halcón gives confidence for our highest expectations for the future potential of the wider field which has the capacity for another 100 drilling locations. It proves the value we saw in this property when we acquired it in 2011. It also confirms the decision to bring world class operator Halcón to the project to advance the drilling program. The success at Eagle Ford will generate the revenue needed to fund the further development of our projects.
— Austin Exploration Managing Director and CEO, Dr. Mark Hart

In April 2014, Austin announced that drilling had begun on the second and third wells in tandem due to the good initial production rates from the Stifflemire #1H). The Kaiser 2H and the Nemo 1H well be drilled to a planned total depth of 17,500 feet with an 8,000 to 10,000 foot lateral.

Austin has approximately 5,000 acres covering the Eagle Ford Shale formation in Burleson County, TX. The company is primarily targeting the Eagle Ford Shale and Austin Chalk, but is also prospective for the Taylor Sands, Buda Limestone and Georgetown formations.

Read more at austinexploration.com

Swift Energy Reveals Initial Production Rates for Six Eagle Ford Test Wells

Swift Eagle Ford Acreage Map
Swift Eagle Ford Acreage Map

Swift Energy tested three Eagle Ford wells in the Fasken area of Webb County, with average initial production (IP) rates of 22.1 mmcf/d. The Company has identified an additional 50-60 undeveloped lower Eagle Ford locations in the Fasken area and expects future well costs to be approximately $7.5 million. The company is currently in the negotiations process for a joint venture in this area to accelerate development.

Read more: Swift Energy is Pumping More Fluid and Proppant in Eagle Ford Well Completions

Swift Energy also tested three wells in McMullen County, with average IP rates of 1,212 boe/d. In the fourth-quarter of 2013, Swift tightened frac stage intervals and used higher volumes of fluid and proppant in Eagle Ford well completions. The IP rate for a McMullen County well completed using this technique in the fourth-quarter of 2013 was 1,608 boe/d. Similar IP rates from the most recent test wells indicate the company is continuing to utilize this strategy as it refines its process for well completions.

We are very pleased with our continuing operational improvements in these two key areas of our Eagle Ford acreage. The repeatable results in these areas provide a more predictable production growth profile, which is essential to our near term objectives of reducing financial leverage and increasing our liquidity profile.
— Terry Swift, CEO of Swift Energy

Swift Energy Eagle Ford IP Rates Per Well in Webb County

  • Fasken BD 14H - 20.6 mmcf/d
  • Fasken BCD 10H - 22.5 mmcf/d
  • Fasken AB 9H - 23.3 mmcf/d

Swift Energy Eagle Ford IP Rates Per Well in McMullen County

  • PCQ EF 14H - 1,302 boe/d
  • PCQ EF 15H - 1,292 boe/d
  • PCQ EF 16H - 1,042 boe/d

Halcon Resouces' Record Eagle Ford IP Comes From Step Out Well - Nears Acreage Target

El Halcon Eagle Ford Play Map
El Halcon Eagle Ford Play Map

Halcon Resources set an initial production record from an Eagle Ford well in Brazos County that is a five mile step out from the nearest producing well. The Stasny-Honza 1H came online producing 1,262 boe/d.

Halcon has three rigs working in the area and plans to have four rigs active through 2014. The company spudded 13 wells and brought 19 wells to production in the third quarter. Net production from the area grew to 6,500 boe/d from 31 wells during the quarter. Eight wells are waiting to be completed and three wells are being drilled.

Third quarter results were defined by continued expansion of our activities in the Williston Basin, El Halcón and other areas.
— Floyd C. Wilson, Chairman and Chief Executive Officer

The company continues to work toward and optimal drilling and completion combination. The average time from spud-to-total depth decreased to 14.4 days during the quarter and the average drilling cost per foot decreased 19%. A company record was set by drilling a well with an 8,000 ft lateral in 7.3 days.

Halcon is closing in on its target of leasing 100,000 net acres in the area. The company has secured leases or commitments on 90,000 plus acres to date.

Company-wide more than 40% production growth is expected in 2014. Read the full release at halconresources.com